Basic Phone Features; Place A Call; Answer A Call; Call Waiting - Polycom VVX 500 Quick Start Manual

Basic Phone Features

Place a call

Use any of the following approaches to place a call:
Dial the number and lift the handset
Dial the number then press the Speaker button
Dial the number then press the Dial soft key
If you are using a headset, dial the number then press the Headset
button
If you have selected a number from a directory, press the Dial soft key

Answer a call

Lift the handset
If you are using a headset, press the Headset button
To use the speakerphone, press the Speaker button
Press the Answer soft key

Call waiting

If you're on a call and a new incoming call arrives, a call waiting tone
beeps, and the Incoming Call window displays
To answer the call, press Answer. This will place your active call on Hold
To send the incoming call to Voicemail/Reception (depending on your
setup), press Reject
If you don't answer the call within 10secs, the Incoming Call window
disappears. Press
NEXT TELECOM QUICKSTART GUIDE
to see active call/s again
| POLYCOM VVX 500/600 5