Dmx Chanel Selection (Dmx Protocol); Notes On Dmx Functions - GLP Impression X4 BAR 20 Instruction Manual

Hide thumbs Also See for Impression X4 BAR 20:
Table of Contents

Advertisement

6 DMX Chanel Selection (DMX Protocol)

Seven DMX modes are available to suit different applications and preferences:
 Normal Mode (34 Channels): Most common mode with all basic functions. See
page 14.
 Compressed Mode (20 Channels): Limited channel mode. Channels are
sorted to match the Impression X4 normal mode. See page 15.
 High Resolution Mode (35 Channels): Same as Normal Mode but with 16-bit
master dimming. See page 16.
 Single Pixel Mode (88 Channels): Individual control of the RGBW values for
each pixel, which allows for pixel mapping. See page 17.
 Single Pixel High Resolution Mode (89 Channels): Same as the Single Pixel
Mode but with 16-bit master dimming. See page 19.
 Dual Pixel Mode (48 Channels): Similar to Single Pixel Mode but with 2 pixel
combined as one to reduce the channel count. See page 21.
 Dual Pixel High Resolution Mode (49 Channels): Same as the Dual Pixel
Mode but with 16-bit master dimming. See page 22.

6.1 Notes on DMX Functions

1)
Indicates start colors for the rainbow effect. If you select one of these colors before
activating the rainbow effect, all IMPRESSION X4 Bars will start from that color and
execute the rainbow effect synchronously. IMPRESSION X4 Bars with other
indicated start colors will also execute the rainbow effect synchronously. If you select
a color that is not defined as a rainbow effect start color, the rainbow effect starts with
red.
2)
Pauses rainbow effect. After resuming, the effect continues from the current color.
3)
Starts rainbow effect. The effect runs synchronously if started from one of the
defined start colors. See note 1, above.
4)
Set 2 values are visible only when a pattern is applied to Set 1. Set 3 values are
visible only when patterns are applied to Sets 1 and 2.
Pixels are numbered 1-20 from left to right as shown below. Note: The head is tipped
forward (DMX value = 0), the display is in front, and the input sockets are on the left.
impression X4 BAR 20 manual (v1.8)
GLP  German Light Products GmbH
from software version: v0.60
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Impression x4 bar

Table of Contents