Time Adjustment Input Function; Manual Operation On Recovery From Power Failure - Omron H5S Instruction Manual

6-2. Time Adjustment Input Function

Time can be set to 00 min 00 s at the same time as external
input is applied. When group-mounting two or more Time
Switches, their times can be synchronized.
Time synchronization possible!
Times of two or more H5S Time Switches can be synchronized.
<Configuration example>
The master unit is set to
turn ON pulse-output on
the hour (e.g. at noon)
using output that is not
used.
6-3. Manual Operati o n on Recovery from Power Fai l u re
After power is restored to the H5S, it is possible to set the Time
Switch to stop turning ON output until external input is applied.
Power
supply
External
input
Output
ON
indicator
(In the upper left corner of the screen)
Output
Master
OFF Flashing ON
Weekly
2 chnls
Note
• Before using this function, input
assignment is required.
( Section 6-6-2)
• This function cannot be used
when power is OFF.
• Refer to "Section 3. Wiring" in
the Installation for wiring.
Input
Slave
Weekly
2 chnls
Note
• This function is useful to
prevent output from
automatically turning ON after
recovery from power failure.
• Before using this function, input
assignment is required.
( Section 6-6-2)
• Refer to "Section 3. Wiring" in
the Installation for wiring.
- 44 -
Yearly Yearly
2 chnls 4 chnls
Input
Slave
Yearly Yearly
2 chnls 4 chnls