Program Check Function - Omron H5S Instruction Manual

5-2. Program Check Function

The set days and times when output turns ON and OFF over
the course of one week can be displayed in the sequence the
Time Switch is to operate.
Press
TEST
("test" flashes and the day and time of the
next change in output state is displayed.)
Press
WRITE
The display shows the time of the next
change in output state.
Each time WRITE
the display shows the days and times
for one week.
If is pressed while displaying
WRITE
the last setting for the week, "end" is
displayed for 2 s and the Time Switch
automatically returns to run mode.
Note
• Output is not turned ON or OFF according to displays in program check mode
but according to settings and the current time.
• Program check mode can be entered from run mode only.
• Holiday settings (
5-4 weekly type only), and yearly settings (
are also displayed.
• Settings for one week from the current day on can be checked with this function.
• After one-week schedule set for the circuit 1 is displayed, the display starts to
show one-week schedule set for the circuit 2.
• If no Key input is entered within 30 s or if
more, the display automatically returns to run mode.
for 2 s or more in run mode.
.
is pressed,
5-1), day override operation settings (
Weekly
2 chnls
The
SUN MON TUE WED THU
SUN MON TUE WED THU
is pressed again for 2 s or
TEST
- 35 -
Yearly Yearly
2 chnls 4 chnls
color indicates flashing.
FRI
FRI
4-6 yearly types only)
SAT
SAT