Installing A Secure Digital (Sd) Expansion Card - HP iPAQ hx2000 Series User Manual

Installing a Secure Digital (SD)
Expansion Card
Note: You install a SD card the same way you install a CF card
into the expansion slot.
To install a Secure Digital (SD) card into the expansion slot on
the iPAQ Pocket PC:
1. Locate the slot on the top of the iPAQ Pocket PC.
2. Remove the protective plastic card.
3. Insert the expansion card into the expansion slot and push the
connection edge of the card firmly into the expansion slot.
Note: If your expansion card is not recognized, follow the card
manufacturer's instructions to install it.