802.1X Certificate Enroller; Leap Registration Utility - HP iPAQ hx2000 Series User Manual

802.1X Certificate Enroller

This utility allows you to request a user certificate from a
certificate server. Once the certificate has been received and
stored on your HP iPAQ, you can access the network using one of
the 802.1X protocols. Refer to
Settings" earlier in this chapter for information on selecting one
of these protocols.
To retrieve a certificate:
1. Be sure your HP iPAQ has an ActiveSync connection to a
computer on the same network as the certificate server.
2. Tap Start > Settings > System tab > Certificates.
3. Complete the on-screen certificate request form by entering
your name, password, and the server in which you want to
retrieve the certificate.
4. Tap the Retrieve Certificate button to download the
certificate from the server. The status box at the bottom of
the screen will indicate whether the attempt to retrieve the
certificate was successful.
Note: The enrollment tool is specifically designed to interact with
Microsoft Certificate Servers. Alternate Certificate Authority
servers will require a custom enrollment application which can
be developed using the Embedded Visual C 4.0 tool and the
Software Development Kit for Windows Mobile 2003-based
Pocket PCs.

LEAP Registration Utility

Cisco Lightweight Extensible Authentication Protocol (LEAP) is
an 802.1X authentication protocol that uses a username and
password pair to authenticate access by a wireless client to a
wireless router.
"Manually Entering New Network