Installing An Expansion Card - HP iPAQ hx2000 Additional Information

Installing an Expansion Card

To install an expansion card into the expansion slot on the HP iPAQ:
1. Locate the slot on the top of the HP iPAQ.
2. Remove the protective plastic card.
3. Insert the expansion card into the expansion slot and push the
connection edge of the card firmly into the expansion slot.
NOTE: If your expansion card is not recognized, follow the card
manufacturer's instructions to install it.
If you have trouble installing an expansion card, try the following:
• Be sure the label is facing the front of the HP iPAQ.
• Be sure you are not inserting the card at an angle.
• Be sure you insert the connection area first.
59