HP iPAQ hx2000 Series User Manual page 118

Use of the LEAP registration utility is required to log on to a
LEAP-authenticated network. Most of the other types of secure
networks are set up automatically by the HP iPAQ Wi-Fi
connection software. However, accessing a LEAP-authenticated
network requires initial registration using this utility. Once you
have authenticated and accessed this type of network, a
connection can take place automatically whenever you access the
LEAP-authenticated network.
To register the LEAP utility:
1. Tap Start > Programs > LEAP.
2. Tap New to create a LEAP profile. A LEAP profile must
contain the following information:
❏
SSID
❏
Username
❏
Password
❏
Domain
❏
Authentication type required by the LEAP server
3. Tap Modify to make changes to the selected LEAP profile
from the Wireless LEAP list. Changes to the LEAP profile
can also be made by tapping on an entry in the Wireless
LEAP list.
4. Tap Delete to delete the selected LEAP profile from the
Wireless LEAP list.