Installing A Secure Digital (Sd) Expansion Card - HP iPAQ hx2000 User Manual

Installing a Secure Digital (SD)
Expansion Card
Note:
into the expansion slot.
To install a Secure Digital (SD) card into the expansion slot on
the iPAQ Pocket PC:
1. Locate the slot on the top of the iPAQ Pocket PC.
2. Remove the protective plastic card.
3. Insert the expansion card into the expansion slot and push the
connection edge of the card firmly into the expansion slot.
Note:
manufacturer's instructions to install it.
User's Guide
You install an SD card the same way you install a CF card
If your expansion card is not recognized, follow the card
Expansion Cards
11–2