Getting Started With Wi-Fi; Powering Wi-Fi On Or Off - HP iPAQ hx2000 Series User Manual

Getting Started with Wi-Fi

Use this section to learn how to use Wi-Fi, automatically connect
to a network, manually enter new network settings, and search for
networks.

Powering Wi-Fi On or Off

To use Wi-Fi on your HP iPAQ, you need to turn on Wi-Fi and
set up your device.
Note: The Wi-Fi antenna for the HP iPAQ is located in the top of
the unit. If you cover up the top of the HP iPAQ after you have
turned on Wi-Fi, signal strength diminishes.
To turn the Wi-Fi on or off:
1. From the Today screen, tap the iPAQ Wireless icon (
the Command bar located at the bottom of the screen.
2. Tap the Wi-Fi button.
When Wi-Fi is powered on, the Wi-Fi icon on the iPAQ
Wireless screen turns from gray to to amber to green and the
Wi-Fi light-emitting diode (LED), located on the top left
corner of the unit, is solid blue indicating one or more radios
are on.
Note: Even though the indicator is blue to indicate Wi-Fi is turned
on, it does not necessarily mean a connection has been
established with another device or access point.
If Wi-Fi is off, the Wi-Fi icon turns from green to gray.
) in