HP iPAQ hx2000 Series User Manual page 81

5. Tap OK or ENTR.
6. Tap a finger to enroll.
7. Swipe the selected finger, as instructed.
✎
For more information on finger swiping, see the section
"Enrolling a Fingerprint" or tap the Training button.
8. Tap OK.
9. Tap Yes to save changes.
Setting "PIN AND fingerprint" for Logon
In this mode, you are required to enter both a PIN and a
fingerprint to logon.
1. From the Today screen, tap Start > Settings > Password.
2. Select "PIN AND fingerprint" from down arrow list.
3. Select from the down arrow list the length of time the
iPAQ Pocket PC can remain unused before you must reenter
the PIN.
4. Tap 4 digits in the PIN field.
5. Tap OK or ENTR.
6. Tap a finger to enroll.
7. Swipe the selected finger, as instructed.
✎
For more information on finger swiping, see the section
"Enrolling a Fingerprint" or tap the Training button.
8. Tap OK.
9. Tap Yes to save changes.