HP iPAQ hx2000 Series User Manual page 80

Setting "Strong alphanumeric password" for Logon
In this mode, you are required to enter a strong password with
at least seven characters to logon. This password must contain a
combination of upper and lowercase letters, numerals, or
punctuation.
1. From the Today screen, tap Start > Settings > Password.
2. Select "Strong alphanumeric password" from the down
arrow list.
3. Select from the down arrow list the length of time the
iPAQ Pocket PC can remain unused before you must reenter
the password.
4. Enter seven alphanumeric characters in the Password field.
✎
Your password must have at least seven characters and contain
both upper and lower case letters and numbers. You can use
punctuation marks.
5. Repeat step 4 in the Confirm field.
6. Tap OK.
7. Tap Yes to save.
Setting "PIN OR fingerprint" for Logon
In this mode, you are required to enter a 4-digit PIN or fingerprint
to logon.
1. From the Today screen, tap Start > Settings >
2. Select "PIN OR fingerprint" from the down arrow list.
3. Tap 4 digits in the PIN field.
4. Select from the down arrow list the length of time the
iPAQ Pocket PC can remain unused before you must reenter
the PIN.
Password.