Charging A Spare Battery - HP iPAQ hx2000 Series User Manual

4. Connect one end of the USB sync cabe to the bottom of the
Pocket PC.
5. Connect the USB cable to an available USB Port on your
USB powered device, such as a laptop.
NOTE: The Pocket PC charges slower when using an USB cable
than with an AC Adapter.

Charging a Spare Battery

Battery Saving Tip: To ensure you always have battery power
available, invest in an extra Standard Slim Battery or
Extended Battery. These batteries can be charged in the HP
iPAQ Battery Charger. To purchase an extra battery and/or a
battery charger, refer to the HP Web site at
www.hp.com/go/ipaqaccessories
To charge a spare battery:
1. Plug the AC Adapter into an electrical outlet 1 and connect
the other end of the AC Adapter to the AC connector on the
battery charger 2.
2. Insert the battery into the battery compartment 3 with the
connectors on the top of the battery lined up with the
connectors inside the battery compartment, and push in to
seat it 4.
3. When the light on the front of the battery charger 5 is
blinking amber, the battery is charging. When the light
becomes solid amber, the battery is completely charged and
ready to use.
If the battery light goes out when you are charging the
NOTE:
battery, you either have a bad battery or a timeout has occurred.
.