Command Trigger Control - Opticon NLV-5201 User Manual

6.1.2

Command Trigger Control

The reading operation can be started / terminated by sending commands.
Item
External trigger
* When the default read time (refer to Read Time) is invalid, the read time with the Z command will be 'Indefinitely'
and reading will stop by Y command.
When reading with a command, start reading by trigger "Z" command, and stop reading by sending "Y"
command etc.
Command
When effective read time is set, it stops reading when the set time elapses. Also, it stops when
sending "Y" commands etc.
Command
NLV-5201 User's Manual
1st
Command
Z Start reading
Y Stop reading
"Z"
Command
"Z"
Command
Read time option (Configured)
Description
"Y"
Scan time
Scan time
Chapter-6
Reading and Timing
Remark
Command only
Command
68