Prefix / Suffix (Appending Character Function) - Opticon NLV-5201 User Manual

10.1

Prefix / Suffix (appending character function)

The following section explains the additional functions that can place informational characters just
before the decoded data (pre-data) or be transmitted immediately after the data (post-data).
Output Format:
● Prefix / suffix (up to 4 digits)
Specified characters can be added in front of or at the end of the data for each specific symbology.
*1 By default, the prefix is empty and the suffix of all codes is a "CR" character.
*When using 9.2.6 OCR Free Edit or 8.1.4 Data Edit Function, this cannot be set.
● Preamble / Postamble (up to 8 digits)
Specified characters can be added in front of or at the end of the data for all codes.
*By default, they are empty.
Preamble
Max 8 digits
*By default, <CR> is added to suffix with all codes "RZ" command.
NLV-5201 User's Manual
1st
Prefix
for each code
Decoded Data
Max 4 digits
Suffix (*1)
Postamble
for each code
Max 4 digits Max 8 digits
Chapter-10
String Options
126