Buzzer And Led Indicator - Opticon NLV-5201 User Manual

2.7.4

Buzzer and LED Indicator

Buzzer sound and lighting color of LED indicates status of the scanner.
The scanner status, buzzer sound and status LED are described as below.
Status LED
Item
Start-up sound When powered on.
Good read sound When reading successes
Data transmission
In USB, when connection is not established.
error
Batch reading When one code is read and if it does not yet
Intermediate meet the conditions to output data in batch
sound reading or concatenated code reading.
Read timeout When code is not read within the effective
sound time period.
When reading start ZZ menu code.
When reading defined menu code.
1D ZZ menu
When reading not defined menu code.
Reading sound
When reading end ZZ menu code.
When save setting is complete
When reading 2D menu code.
2D menu
Reading sound
When save setting is complete.
If internal temperature exceeds a certain
High temperature temperature, reading operation becomes
protection mode disabled. While in this mode, it beeps with a 3
seconds interval.
* Low: around 1000 Hz, Low middle: around 1000-2000 Hz, Middle low: around 2500 Hz, Middle: around 3000 Hz,
Middle high: around 3500 Hz, High: around 4000Hz.
* Refer to 4. Indicator for setting detail.
* Above is the definition of the representative status and does not indicate all of the operations.
NLV-5201 User's Manual
1st
Rumble timing
Buzzer Holes
Tone interval
Low - Low middle 2 time -
Middle tone Combination
Middle tone 1 time
(Middle - Middle low tone)
6 times
Short High tone 1 time
Low tone 2 times
Middle - Middle low -
Middle high tone
Middle - Middle low -
Middle-high tone
Low tone 2 times
Middle - Middle low -
Middle-high tone
(Middle - Middle low -
Middle high tone) 3 times
Middle - Middle low -
Middle high tone
(Middle - Middle low -
Middle high tone) 3 times
High tone 2 times
Chapter-2
Before Using
LED color Enable/Disable
3 color Configurable
(Default: Enable)
Configurable
Light blue
(Default: Enable)
Red Enable (Fixed)
Configurable
None
(Default: Enable)
Configurable
Red
(Default: Disable)
Yellow Enable (Fixed)
Yellow Enable (Fixed)
Red Enable (Fixed)
Yellow Enable (Fixed)
None Enable (Fixed)
Yellow Enable (Fixed)
None Enable (Fixed)
Orange Enable (Fixed)
19