Owner´s manual Koala
Raising/lowering the seat manually
1. When you are raising the seat, remove the cushion and screw out the
three screws that hold the seat, when lowering, go straight to point 2.
2. Remove the screw that holds the positioning-motor cylinder bar in the
seat lift, see fig. 38.
3. Raise/lower the seat lift. When raising the seat, you can use the catch
to hook it up, see fig 38.
The seat is heavy, and you must handle it carefully to avoid injury.
Fig. 38. Fixing screws and catch on cylinder rod
-52-
Repairs