Maintenance And Service Calendar - Taurus TF-ERGO-X Assembly And Operating Instructions Manual

2.2 Faults and troubleshooting
The equipment runs through regular quality controls during production. Nevertheless, errors
or malfunctions on the equipment may occur. Individual parts are often the cause of faults and
replacement is usually sufficient. Please use the following overview to see the five most common
errors and how to repair them. If the equipment still does not work properly, please contact your
contract partner.
Problem
Crackling noise in pedal area Loose pedals
Equipment wobbles
Handlebar/saddle wobbles
Display does not turn on
No pulse reading
2.3

Maintenance and service calendar

The following routine work must be done in the specified time intervals:
Part
Display console
Tighten the pedals
Plastic cover
Legends: C = cleaning; I = inspect
8
Cause
Equipment is not level
Screws are loose
Power is disconnected
• Sources of interference in the
room
• Using a chest strap:
- Unsuitable chest strap
- Chest strap is incorrectly
positioned
- Batteries are empty
Weekly
C
C
Solution
Tighten the pedals
Adjust the supporting feet
Tighten screws
Check all plug connections and see
if the plug is plugged in
• Eliminate sources of interference (e.
g. mobile phone, loudspeaker, etc.)
• Use a suitable chest strap (see
recommended accessories)
• Reposition the chest strap and/or
moisten the electrodes
• Charge the batteries
Monthly Twice a year
I
I
ERGO
I
X