WOOD PLYO BOX WITH COVER NO. 084 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 – 90...
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly.
PARTS LIST PART SPECIFICATION Board 22.6 x18.7 Board 28.5 x18.7 Board 30x20 Board 24x20 Board 30x24 Screw Cam Connector Wood Dowel Foam Cover Side Foam Cover Ordering Replacement Parts (U.S. and Canadian Customers only) Please provide the following information in order for us to accurately identify the part(s) needed: √...
ASSEMBLY INSTRUCTIONS Tools needed: screwdriver (not included) STEP 1: Insert Screws into the Boards C, D, and E as shown. Insert Wood Dowels into the holes in C, D, and E as shown. Cam Connectors are pre-installed in the boards. The sides of the boards that have the C, D or E labels face the inside.
Page 6
STEP 3: Note: Check the arrow on the Cam Connectors pointing direction of the screw hole so the screws into Connectors. Assemble 2 pcs C to A. Fit the screws into the Cam Connectors. Turn the Connectors clockwise tighten. STEP 4: Note: Check the arrow on the Cam Connectors pointing...
Page 7
STEP 5: Note: Check the arrow on the Cam Connectors pointing direction of the screw hole so the screws into Connectors. Assemble 2 pcs E to C and D. Fit the screws into the Cam Connectors. Turn the Cam Connectors clockwise to tighten.
ADDING THE COVER A foam cover for the plyo box is included. This is OPTIONAL. Fit the side foam covers to the box. The sides with the Velcro strips along the top and bottom face outside. Fasten the Velcro. Fit the top and bottom covers onto the box.