Usb Board (Select Products Only) - HP Pavilion 15 Maintenance And Service Manual

USB board (select products only)

Table 5-9 USB board description and part number
Description
USB board
USB board cable
NOTE: On models equipped with GTX graphics, the USB board is soldered on to the system board, and
cannot be removed.
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the USB board:
1. Disconnect the cable from the ZIF connector on the USB board (1).
2. Remove the three Phillips M2.0 × 4.0 screws (2) that secure the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the USB board.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 37).
34).
34).
Component replacement procedures
Spare part number
L23896-001
L23901-001
59