Fingerprint Reader Board (Select Products Only); Fan - HP Chromebook x360 14c Maintenance And Service Manual

Fingerprint reader board (select products only)

To remove the fingerprint reader board, use this procedure and illustration.
Table 5-5 Fingerprint reader board description and part number
Description
Fingerprint reader board (includes cable)
Before removing the fingerprint reader board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
Remove the fingerprint reader board:
1. Disconnect the cable from the ZIF connector on the system board (1).
2. Remove the Phillips M2.0 × 2.0 screw (2) that secures the fingerprint reader bracket, and then remove
the bracket from the computer (3).
3. Remove the fingerprint reader board from the computer (4).
Reverse this procedure to install the fingerprint reader board.

Fan

To remove the fan, use this procedure and illustration.
Table 5-6 Fan description and part number
Description
Fan assembly
(Preparation for disassembly on page
(Bottom cover on page
Battery on page 23).
21).
Component replacement procedures
Spare part number
M00315-001
21).
Spare part number
M00324-001
27