Nidec Digitax HD M75X Series Quick Start Manual page 7

EN 61800-5-2:2016
EN 61800-5-1:2016
(in extracts)
EN 61800-3: 2004+A1:2012
EN ISO 13849-1:2015
EN 62061:2005 + AC:2010 +
A1:2013 + A2:2015
IEC 61508 Parts 1 - 7:2010
Person authorised to complete the technical file:
P Knight
Conformity Engineer
Newtown, Powys, UK
DoC authorised by:
IMPORTANT NOTICE
These electronic drive products are intended to be used with appropriate motors,
controllers, electrical protection components and other equipment to form complete end
products or systems. It is the responsibility of the installer to ensure that the design of the
complete machine, including its safety-related control system, is carried out in accordance
with the requirements of the Machinery Directive and any other relevant legislation. The use
of a safety-related drive in itself does not ensure the safety of the machine. Compliance with
safety and EMC regulations depends upon installing and configuring drives correctly,
including using the specified input filters. The drive must be installed only by professional
installers who are familiar with requirements for safety and EMC. The assembler is
responsible for ensuring that the end product or system complies with all relevant laws in
the country where it is to be used. For more information regarding Safe Torque Off, refer to
the Product Documentation.
Digitax HD M75X Quick Start Guide
Issue Number: 2
Adjustable speed electrical power drive systems -
Part 5-2: Safety requirements - Functional
Adjustable speed electrical power drive systems -
Part 5-1: Safety requirements - Electrical, thermal and energy
Adjustable speed electrical power drive systems -
Part 3: EMC requirements and specific test methods
Safety of Machinery, Safety-related parts of control systems,
General principles for design
Safety of machinery, Functional safety of safety related
electrical, electronic and programmable electronic control
systems
Functional safety of electrical/ electronic/programmable
electronic safety-related systems
Jonathan Holman-White
Director, Technology
Date: 14th May 2018
Place: Newtown, Powys, UK
7