Nidec Digitax HD M75X Series Quick Start Manual page 5

These products comply with the Restriction of Hazardous Substances Directive (2011/65/EU), the
Low Voltage Directive (2014/35/EU) and the Electromagnetic Compatibility Directive (2014/30/EU).
These electronic drive products are intended to be used with appropriate motors,
controllers, electrical protection components and other equipment to form complete end
products or systems. Compliance with safety and EMC regulations depends upon installing
and configuring drives correctly, including using the specified input filters.
The drives must be installed only by professional installers who are familiar with
requirements for safety and EMC. Refer to the Product Documentation. An EMC data sheet
is available giving detailed information. The assembler is responsible for ensuring that the
end product or system complies with all the relevant laws in the country where it is to be
used.
Digitax HD M75X Quick Start Guide
Issue Number: 2
Jonathan Holman-White
Director, Technology
Date: 14th May 2018
Place: Newtown, Powys, UK
5