Table of Contents
Advertisement
Router Design
3.7.5
SIM Card Reader
There are 2 SIM card readers for 3 V and 1.8 V SIM cards located on the rear
panel of the router.
In order for the router to function properly, insert an activated SIM card with
the PIN code unblocked in to the SIM card holder. Each SIM card can have
a different APN (Access Point Name).
Note: When changing the SIM Card, pay close attention to the following
rules:
Before handling the SIM card, disconnect the router from the power
supply.
Use the flat end of a plastic screwdriver, or your fingernail, to press the
SIM card slightly deeper into the slot until you hear a click.
After you hear a click, release the SIM card. The SIM card pops out of the
slot.
Place SIM card 1 in the slot with the contacts face down, and SIM card 2
in the slot with the contacts face up.
Figure 14: Placement and location of the SIM holder
30
3.7 Description of the Front Panel
UM Installation OWL_LTE
Release 1.0 09/2015
Advertisement
Table of Contents
