Table of Contents
Advertisement
3.5.5
SIM Card Reader
There are 2 SIM card readers for 3 V and 1.8 V SIM cards located on the front
panel of the router.
In order for the router to function properly, insert an activated SIM card with
the PIN code unblocked in to the SIM card holder. Each SIM card can have
a different APN (Access Point Name).
Note: When changing the SIM Card, pay close attention to the following
rules:
Before handling the SIM card, disconnect the router from the power
supply.
Press the small button under the SIM card slot to eject the SIM card
holder.
Remove the SIM card and place another SIM card into the holder.
Very carefully, insert the SIM card holder and SIM card in the slot. Push
the SIM card holder into the slot until it clicks in place.
Figure 13: Example of an ejected SIM card holder
3.5.6
Reset
When the "Power" LED on the front panel has turned on, it is possible to
restore the default configuration of the router by pressing the "Reset" button.
After pressing the "Reset" button, the default configuration is restored and
the router reboots. During rebooting, the "Power" LED blinks.
Note: We recommend that you back up the router configuration before
resetting the router. For detailed information about resetting the router refer
to the User Manual Configuration. Resetting the router returns the
configuration to the default state.
Use a narrow screwdriver for pressing the "Reset" button located on the front
panel.
22
Installation OWL 3G
Release 3 06/2017
Advertisement
Table of Contents
