Help - HP MICRO 3000 Diagnostic Manual

Test Mode Command Descriptions
Help
The
HELP
command does not appear in the test mode menu. When issued, the
HELP
command displays the
available test mode commands and the ROM version number.
The correct syntax for this command is:
HELP
The following illustrates the use of
HELP:
l-NORMAL
Test ->H
ROM Version: nnnn
Self test Menu:
AL[l] [ count]
CH[an] [ count [ ,chan] ]
CP[u] [ count
1
E[xit]
I [omap] [ count ]
M[emory] [ count
PON [ count ]
l-NORMAL
Test
->
IOMAP
The
IOMAP
command executes a version of IOMAP contained in the selftest ROM. This version of
IOMAP runs the memory size portion of the memory test, displays the number of megabytes installed in
the system, lists the load and start/dump devices, and identifies all peAs installed in the system. All
supported HP-IB devices attached to the PIC are identified and their 10 code is displayed with a device
description.
The test may be looped by specifying the desired number of loops in count. Count must be an integer
between I and 9999; the default is 1. (A space is required before specifying count.)
The correct syntax for this command is:
I [omap] [
count]
DEC 86
A
£