Key Menu - Cappuccino - Milk Selection; Key Menu - Hot Water Selection - La Cimbali M2 Manual

English
Press one of the cappuccino – milk dispensing keys (32). The related
LED remains on and does not blink. The display appears as follows:
Þ KEY MENU
Type
Milk dose
Coffee start
Emulsion
HM/FM
rit. reg. flusso
Water dose
Cappuccino-milk selection parameters that can be changed are:
- Type (personalization key, i.e., 1 cappuccino, 2 coffees, 2
cappuccinos, fast wash cycle, stop, disable);
- Milk dose (milk dispensing time: 0 ÷ 60 seconds, with increments
of 0.1);
- Milk start/coffee start ** (milk dispensing delayed after coffee
dispensing, and vice versa)
- Emulsion: (frothed milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1)
You can use the"+" (30) and "-" (31) keys to change the "Start milk"
setting (milk dispensing start delayed after coffee dispensing and
vice versa) from "00" to "99" with "1" second increments.
If over "99" is set, the "Start milk" setting will become the "Start
coffee" setting (coffee dispensing start delayed after the milk
dispensing), then the setting returns to "Start milk" in a cycle.
The default settings for
cappuccino selections are:
Start milk 00.
Press the hot water dispensing key (12). The following message will
appear on the display:
Þ KEY MENU
Type
Water dose

5.1 Key menu - Cappuccino - Milk selection

1 cappuccino
04.0
10
02.0
YES
03.0 u
100 +
(**) Start milk/Start coffee function
Start Milk
00
99
Start Coffee

5.2 Key menu - Hot water selection

5.0
u
+
- HM/FM (if the emulsion time is less than the milk dose time, this
parameter lets you decide which type of milk (frothed or regular)
to dispense first.
YES: regular milk – frothed milk
NO: frothed milk – regular milk.
- Flow delay (disabled)
- Water dose (volumetric dosage pulses: 0 ÷ 999, with increments
of 1)
- Coffee dose MSx (left grinder encoder pulses: 0 ÷ 200, with
increments of 1)
- Coffee dose MDx (right grinder encoder pulses: 0 ÷ 200, with
increments of 1)
- backing (the return time for the chamber, which can be adjusted
for each key: from 0 to 6 with increments of 0.1 seconds.)
- infusion (infusion time: 0 ÷ 6 seconds, with increments of 0.1)
- pressure release (pressure release time: 0 ÷ 5 seconds, with
increments of 0.1)
- drying (pod drying time; 0 ÷ 5 seconds, with increments of 0.1).
Note: the coffee doses for both grinders set in the technical
programming menu, are subject to change in the customer
programming menu within a range of + 10 of the set value.
By setting:
"Start milk 00" - milk dispensing takes place when the selection key
is pressed. After a few seconds, coffee is dispensed;
"Start milk 99" or at a high setting that exceeds the coffee
dispensing time - milk dispensing starts after coffee is dispensed.
"Start milk 05" - coffee dispensing starts, and 5 seconds after the
selection key is pressed, milk is dispensed.
Note: If the time setting exceeds the coffee dispensing time, milk
dispensing begins immediately after coffee is dispensed.
"Start coffee 00" - Coffee dispensing starts after milk is dispensed.
99
"Start coffee 99" or any setting other than 0 - coffee dispensing will
00
start 99 seconds (or after the set time) after milk is dispensed.
The following hot water selection parameters can be modified:
- Water dose (dispensing time in seconds.).
English