Nortel DMS-100 Series General Description Manual page 6

iv
July 1998
BASE08 Standard 04.02
•
August 1997
BASE08 Standard 04.01
•
•
August 1996
BCS36 Standard 03.05 incorporated editorial changes
August 1995
BCS36 Standard 03.04 incorporated editorial changes
April 1995
BCS36 Standard 03.03
•
•
December 1993
BCS36 Standard 03.02
•
•
297-1001-131 Standard 06.01 October 2000
added description of United Kingdom ringing and a limit on Distinctive
Ringing Enhancements
added C3C distinctive ringing pattern information for Malaysia and
Australia from feature AR2137
updated description of revertive ringing, noting that revertive ringing is not
supported for FSR lines
added note in chapter 1 for setting office parameters
IMMEDIATE_RING_ENABLE and
ALLOW_RINGING_ON_TIP_SIDE with regard to immediate ringing
functionality.
added information about response to the QUERYPM command at the
MAP terminal for LCMs when in no-display mode. The switch provides
operating company personnel the status of the ringing generators in a
posted LCM.
incorporated editorial changes
removed low-level software descriptions of ringing functionality