Line cards
The RCT uses the following line cards:
•
•
•
•
•
•
All line cards installed in the RCT must support the type of ringing assigned
to the SCM-100R. The following table lists the compatibility between the RCT
ringing generators and line cards.
Table 4-2 RCT ringing generator and line card compatibility
Ringing
generator
QPP426
QPP430
QPP435
Table RCTINV
Table RCTINV contains information on the RCT, including ringing
information. Refer to the Customer Data Schema Reference Manual for a
description of table RCTINV and sample datafill from table RCTINV.
Assigning ringing to SCM-100S
Assigning ringing to the SCM-100S system involves installing the appropriate
ringing generators and line cards at the SLC-96 and datafilling table RCSINV.
Ringing generators and line cards
To assign ringing to the SCM-100S, the ringing generators and line cards in
the SLC-96 must support the type of ringing desired in the SCM-100S system.
Refer to the documentation associated with the SLC-96 for information on the
ringing generators and line cards.
Table RCSINV
Table RCSINV contains information on the RCS, including ringing
information. A description of table RCSINV, as well as sample datafill from
table RCSINV, is in the Customer Data Schema Reference Manual.
QPP405 - single party remote
QPP497 - universal remote
QPP409 - universal coin remote
QPP440 - frequency selective remote
QPP445 - superimposed remote
QPP541 - frequency selective remote
QPP405
X
DMS-100 Family DMS-100 Ringing System BASE15 and up
Administration of DMS ringing 4-5
Line card
QPP407
QPP409
X
X
QPP440
QPP445
X
X
X