Table of Contents
Advertisement
Install the Antenna
Place the Magnetic Mount Dual Band Antenna on a flat roof
surface of the vehicle. Position it near as possible to the center of
the roof. Run the cable perpendicular to the centerline of the roof,
to the point where the antenna cable will enter the vehicle. Coil
any excess cable in a loose loop inside the vehicle. Secure the
cable as necessary.
Prepare to Install the Transmitter
Check the hardware in your Qualifier Transmitter Installation Kit (part number 101275-001)
with the following illustration.
Use the hardware contained in the kit to mount the transmitter as follows.
2-3
Qualifier System
Route antenna
cable to side of
vehicle.
Advertisement
Table of Contents
Need help?
Do you have a question about the CyberTek QUALIFIER and is the answer not in the manual?