Items Supplied With Your Test Stand; Available Accessories - Mecmesin Vortex-dV Operating Manual

1. Items Supplied With Your Test Stand

When ordering a Vortex-dV you are supplied with the following parts:
 Vortex-dV test stand complete with a pre-selected torque transducer (1.5, 3, 6, or
10 N.m),
 AFTI gauge bracket (for fitting an AFTI torque indicator to the column),
 Allen key for tightening crosshead to gauge bracket,
 Mains cable,
 Document: A Guide to Safe Use of Mecmesin Mains Powered Test Systems,
 Document: Vortex-dV Motorised Torque Testing System, Operating Manual,

Available Accessories

For a full range of digital force gauges and accessories, please go to the Mecmesin
website www.mecmesin.com, or your local distributor, as listed on the back cover.
 When using Mecmesin VectorPro™ Lite software, use communications cable part no.
351-093 to connect the stand to MS-Windows computer,
 Use communications cable part no. 351-092 to connect the Mecmesin Advanced Force
and Torque Indicator (AFTI) to the Vortex-dV.
5  Mecmesin
Vortex-dV Operating Manual