Table of Contents
Advertisement
5. Set TX Units On press
6. Set TX Sign On press
7. Set 115200, press
8. Set CR LF press
9. Ensure the line delay is set to 0 press
10. Ensure TX threshold is set to 0 press
11. Set RS232 press
12. Then press
Note: If using the stand in conjunction with VectorPro please ensure that the units
selected on the gauge match the unit selected within the software.
Vortex-dV Operating Manual
→
→
→
→
→
twice to return to the primary measurement screen.
→
→
Mecmesin 12
Advertisement
Table of Contents
Need help?
Do you have a question about the Vortex-dV and is the answer not in the manual?
Questions and answers