Change Log; New Features; Bug Fixes - Mecmesin Vortex-dV Operating Manual

The latest production firmware release for Vortex-dV devices is 3.0.10, this section
documents the changes at each production firmware release from version 2.0.11 to
3.0.10.
Please note for version numbers not listed below the changes are included with the next
version, for example, bug fixes in versions 3.0.4 to 3.0.5 are listed under in 3.0.6.
All releases include performance enhancements and bug fixes to improve the use
experience. Not all bug fixes are detailed here.

2.0.12 - New Features

N/A


2.0.12 - Bug Fixes

Correction to AFTI Min/Max reset command.

3.0.2 - New Features
Additional menu item 'Information' screen has been added,

Major Feature! User selectable PIN protection for the test stands menus added,

Major Feature! 'Home' button added to return the stand to the last tared position at

the end of the test,
Major Feature! Within the jog settings, you can now to choose whether or not to tare

the AFG/AFTI when pressing the stand's tare button,
Major Feature! In the 'Edit Test Settings' menu, the user can select the test start

direction and whether or not the stand moves to the start position at the beginning
of the test,
Major Feature! On 'AFG/AFTI' controlled tests, the return position will now be the

test start position rather than the limit switch position,
Major Feature! AFG/AFTI stand control torque limits now also work in jog mode,

this can be used to protect damage to the system while jogging,
Major Feature! You can now use the front panel control to pause, stop or continue

the test,
Swedish language option added,

Polish language option added.

Vortex-dV Operating Manual

10. Change Log

Mecmesin  32