NETGEAR S350 Series User Manual page 352

24-port (poe+) and 48-port gigabit ethernet smart managed pro switches with 2 or 4 sfp ports
Hide thumbs Also See for S350 Series:
Table of Contents

Advertisement

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Note: Bridge priority values are multiples of 4096.
If you do not specify a root bridge and all switches are assigned the same bridge priority
value, the switch with the lowest MAC address is elected as the root bridge (see
Configure and View the CST Settings on page 146).
5. On the CST Port Configuration page, select ports 1/0/1–1/0/8 and select Enable from the
STP Status menu (see Configure and View the CST Port Settings on page 148).
6. Click the Apply button.
7. Select ports 1/0/1–1/0/5 (edge ports), and select Enable from the Fast Link menu.
Since the edge ports are not at risk for network loops, ports with Fast Link enabled
transition directly to the forwarding state.
8. Click the Apply button.
You can use the CST Port Status page to view spanning tree information about each port.
9. On the MST Configuration page, create a MST instances with the following settings:
MST ID. 1
Priority. Use the default (32768)
VLAN ID. 300
For more information, see View Rapid STP Information on page 152.
10. Click the Add button.
11. Create a second MST instance with the following settings
MST ID. 2
Priority. 49152
VLAN ID. 500
12. Click the Add button.
In this example, assume that Switch 1 became the root bridge for the MST instance 1, and
Switch 2 became the root bridge for MST instance 2. Switch 3 supports hosts in the sales
department (ports 1/0/1, 1/0/2, and 1/0/3) and in the HR department (ports 1/0/4 and 1/0/5).
Switches 1 and 2 also include hosts in the sales and HR departments. The hosts connected
from Switch 2 use VLAN 500, MST instance 2 to communicate with the hosts on Switch 3
directly. Likewise, hosts of Switch 1 use VLAN 300, MST instance 1 to communicate with the
hosts on Switch 3 directly.
The hosts use different instances of MSTP to effectively use the links across the switch. The
same concept can be extended to other switches and more instances of MSTP.
Configuration Examples
352
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs324tpGs348tGs324t

Table of Contents