NETGEAR S350 Series User Manual page 220

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Configure the Global TACACS+ Settings
You can configure the global TACACS+ settings for communication between the switch and
a TACACS+ server.
To configure the global TACACS+ settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > TACACS+ > TACACS+ Configuration.
6. In the Key String field, specify the authentication and encryption key for TACACS+
communications between the switch and the TACACS+ server.
The range is from 0 to 128. The key must match the key configured on the TACACS+
server.
7. In the Connection Timeout field, specify the maximum number of seconds allowed to
establish a TCP connection between the switch and the TACACS+ server.
The range is from 1 to 30 seconds. The default is 5 seconds.
8. Click the Apply button.
Your settings are saved.
Manage Device Security 220 User Manual