Function Introduction - Haier M1121 User Manual

Headset.
USB cable.

2. Function introduction

2.1 Turn on
Turn on power
Usually press and hold [On/Off] to turn on the phone.
During the process of on act, press any key to stop playing the act and enter next
operation.
Please plug USB cable into phone when phone is off or when you confirm phone is
turned on, don't plug USB cable into phone when it is being turned on to avoid to affect the
play of MIDI.
Input PIN code
To avoid others randomly to use your SIM card, you can setup protection password (PIN
code). After it is set, phone will ask you to input PIN code firstly when phone is turned on.
Input PIN code. (For secrect, * is used to substitute input number on screen.)
Press [OK], phone confirms PIN code is correct, and starts to register on network.
Once network name appears on screen, you can dial or answer call. If there is no network
name, it needs register newly.
Note: SIM card will be locked if worng PIN code is input for three times continuously. In
this case, please contact with SIM card provider.
2.2 Trun off
Turn off power
Press and hold [On/Off] for a long time in any situation to turn off phone power.
2.3 Dial number
•
This function can be used only after network name displays on screen.
•
Input phone number.
•
Press [PickUp] to dial directly; or enter option menu, select dial or IP dial. The
function of Dial is completely same as [PickUp]. If you select IP dial and has input IP
number in phonebook menu (such as IP service number of China Mobile is 17951),
phone will automatically add the service number in fron of the number you input then
dial, if no IP service number is input, it will ask you to input the service number.
8