Haier M1121 User Manual page 13

Enter name list, you can move to the records use the character as head by first character
of name, then continue press [Up]/[Down] to browse.
Such as key [2], Characters on key [2] only include 'A', 'B' and 'C'.
So when press [2] in phonebook list[A record means the record whose first character is
A]:
When first press, if there have records whose first character is A,then move to the first
record of A, if there no records whose first character is A, then move to the first record of B,if
there no records whose first character is B,then move to the first record of C, if there no
records of C, then stay original position. If there have records of A,B,C, then first press 2,
move to the first A record, press 2 again then move to the first B record, press 3 again, then
move to first C record. If press 2 key after press another key, it will repeat these process.
2.6.2 Add new number
SIM card
If current storage is SIM card, then open a name editor firstly, input name, press [OK],
openanumber editor, input code and press [OK] again to complete the input of a record.
Phone
If current storage is phone, open a name editor firstly, input name, press [OK], here enter
name card field option list, you can select different type of information (such as number,
e-mail, etc.), press [OK], input information, press [OK] again to complete the input of a
record. You can add different field to newly created name card, set default field and do
grouping and other operations.
Note: newly created record will be placed in Default group, user can reset it later.
2.6.3 Phonebook list
2.6.3.1 Operation of phonebook list
Phonebook list displays name list, left of the name is the type icon of the record, if it is
SIM card record, it is SIM card icon, if it is phone record, then it dispays the default number
of the phone.
Select some name in the list, you can do following operation by soft option menu on left:
•
IP dial: if you still don't IP service number, prompte you to insert it firstly, then do IP
dial.
•
Send message: send message to default numbers of selected records.
•
Send name cards: you can sent selected record in text format by message. (Note:
because length of message is limited, too much record information may be lost
13