World Time - Haier M1121 User Manual

Pressing [ SKL] you can do the option including: clear,MC,MR,MS M+,details is as below:
CLEAR : Clear all the contexts and start a new calculation.
MC MEMORY CLEAR ,clear the figure in the memorizer.
MR MEMORY READ,
MS MEMORY STORE store the figures into the memorizer
M+ MEMROY PLUS
EXIT: EXIT FROM THE CALCULATOR
Only less than 10 bits can be put into the edit window.
3.5.4 STOPWATCH
The original time is 00:00:0 shown on the screen ,press "START" to do the
timing .LEFT/RIGHT will be the PAUSE/CLEAR. Press "pause" to pause the timing.and
keep the value .By pressing "CONTIUE"or "ok"to go on time again and pressing "CLEAR"
will come back to 00:00:0.
3.5.5 TIMER
The function is very similar with alarm clock, the small difference is setting how long to remain
for reminding you.
ATTENTION: The timer can turn on automatically reminding you .
3.5.6 TURN ON & TURN OFF AUTOMATICALLY
With the function of turn on and turn off automatically.You can set turn on or turn off
separately. Select "start" to get into the editor and input time of turn on and turn off..
While turning on the mobile phone you should test the PIN code otherwise it will stay in the
PIN code iput process.
ATTENTION: Do not use mobile phone while taking air plane,pls note to avoid turning on
automatically by this function.Our company refuse to be responsible for any aftereffect caused
by this.

3.5.7 WORLD TIME

You can check the time of different time zone.
There is a line of time in the up and below of the world map,the up is the time of other city
and below is local time.
If there is a mark of daylight saving time then it is daylight saving time here.
You can choose city by Pressing [LEFT]/[RIGHT] on longitudePressing [UP]/[DOWN] to
choose city on latitude.
You can do the setting to other city in the option menu for example whether it is daylight
saving time of you can set the time of other city as local time.
read the figure in the memorizer
calculate all the figures of the memorizer and store them.
48