• Press the [Mode] key to store the desired setting and move to the
next function.
4.4
SDT = RS-232 CONTROL
• When this function is displayed with the current setting, press the
[Unit] key to change to the other settings.
1
2
3
4
• Press the [Mode] key to store the desired setting and move to the
next function.
4.5
PAT = SETTING OF PARITY
• When this function is displayed with the current setting, press the
[Unit] key to change to the other settings.
8 n 1 - 8 data bits, no parity (default setting)
7 E E E E 1 - 7 data bits, even parity
7 0 0 0 0 1 - 7 data bits, odd parity
• Press the [Mode] key to store the desired setting and move to the
next function.
4.6
BPS = SELECTING BAUD RATE
• When this function is displayed with the current setting, press the
[Unit] key to change to the other settings. The options are 1200,
2400, 4800 and 9600 (default).
• Press the [Mode] key to store the desired setting.
• To return to weighing switch the scale off and then on again.
© Adam Equipment Company 2007
Continuous output
Outputs under command from PC
Outputs weight when the scale is stable
Outputs complete data to printer when scale is stable
10