Rs-232 Parameters - Adam Equipment AGB Series Manual

Chk bp Checkweighing
settings
Unit Enable or disable weighing
units,
disable all units, at least one
has to be enabled. Parts
counting
enabled/disabled
Auto-Z Auto zero settings
Filter Filter setting to slow, normal
or fast
Rs 1 Brings up the 1
menu.
command and print settings
Rs 2 Brings up RS232 menu 2
S-id Set Scale ID
U-id Set User ID
rechar Indicates time to recharge
7.2

RS-232 PARAMETERS

This group of parameters can be set by the user for setting the RS-232 active or not, baud
rate, printing mode, accumulation mode, RS-232 language, and user or scale ID numbers.

Pressing the [Func/Set] key and holding for 2 seconds during normal
operation allows the user to access the parameters.
Scroll through the list of functions using the ⭡ and ⭣ directional keys. Press

[Tare/↵] to enter the 'rs 1' or 'rs 2' parameters when appearing on the
display.

'Rs 1' will provide access to 'Print', 'PC' and 'Cmd' settings. 'Rs 2' includes
'PC' and 'Cmd' only. Press [Tare/↵] to confirm.

When entering a mode, the user will be required to go through each step of
the process by entering the desired values or selecting from the options listed
in the table below and pressing the [Tare/↵] key to confirm.

Press [0/Esc] to exit the scale parameter section and return to normal
weighing.
beeper
will not allow
can
st
RS232
Includes PC,
In
Out
Off
Kg
to Grams
lb
oz
be lb:oz
N (Newtons)
PCS
0.5
1
1.5
2
2.5
3
Slower
Slowest
Faster
Fastest
Then: 1-6
PC
Cmd
Print
PC
Cmd
To be entered manually
To be entered manually
-
In
Kg
0.5
Faster
000000
000000
-