M1; End Job "Je" 01H 00H 00H - Epson L1300 Programming Manual [Page 68]">
Download Table of Contents Contents Print this page

Start Job "Js" Nl Nh 00H <Job Name> M1; End Job "Je" 01H 00H 00H - Epson L1300 Programming Manual

4 color ink jet printer
Hide thumbs Also See for L1300:
Table of Contents

Advertisement

6.1.7 Start job "JS" nL nH 00H <job name> m1
6.1.8 End job
"JE" 01H 00H 00H
[Format]
"JS" nL nH 00H <job name> m1
"JE" 01H 00H 00H
nL = (length of <job name>) + 2
nH = 00H
[Parameters]
[Function]
Revision: 2
The parameter "m1" is one byte binary data that fixed to zero.
Construct a print job. Then turn page and line position reply on/off, and set the position reply
repeat rate if the position reply is enabled. If the host uses the cancel job command or it needs the
page and line position reply, it must send print data as a print job.
The print job is started with the "JS" command and terminated with the "JE" command. After
starting a job with the "JS", if the "JS" is sent again without the "JE", the previous print job will be
terminated with the second "JS".
After power-on initialization, the print job is not defined, and position reply is disabled.
This command will be ignored and skipped if the product does not support this command.
This command is available only in Remote.
2016/08/25
Page: 68

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Et-14000

Table of Contents