Set Unit (Extended) Esc - Epson L1300 Programming Manual

5.1.13 Set unit (extended) ESC (U nL nH P V H mL mH
ESC (U nL nH P V H mL mH
[Name]
[Format]
[Range of Definition]
[Function]
[Initial State]
[Related Commands]
Revision: 2
Set unit(extended)
1BH, 28H, 55H, nL, nH, P, V, H, mL mH
nL=05H, nH=00H
P=( mH*256 + mL ) = 90, 120, 180, 360, 720, 1440, 2880
V=( mH*256 + mL ) = 90, 120, 180, 360, 720, 1440, 2880, 5760
H=( mH*256 + mL ) = 90, 120, 180, 360, 720, 1440, 2880, 5760
1) Set the following standard values in units of b / ( mH * 256 + mL ) * 25.4mm :
The H parameter determines the horizontal position setting units
The V parameter determines the vertical position setting units
The P parameter determines the page management units
2) This Command is only effective in graphics mode.
Page management value:
Relative horizontal position setting value:
Absolute horizontal position setting value:
Relative vertical position setting value:
Absolute vertical position setting value:
[Setting] Commands whose settings are affected by this command.
None
[Setting] Commands that change the effects of this command.
None
[Operation] Commands whose functionality is affected by this command.
The relative horizontal position setting value used by the ESC ¥ and ESC( / commands is set.
The absolute horizontal position setting value used by the ESC $ and ESC( $ commands is set.
The relative vertical position setting value used by the ESC (v command is set.
The absolute vertical position setting value used the ESC (V command is set.
The unit page length specification value used by the ESC (C command is set.
The page format specification value used by the ESC (c command is set.
The paper dimension specification value used by the ESC (S command is set.
[Operation] Commands that change the effects of this command.
The printer settings are restored to their initial state to by the ESC @ command.
0.071mm(1/360 inch)
0.141mm(1/180 inch) units
0.423mm(1/60 inch) units
0.071mm(1/360 inch) units
0.071mm(1/360 inch) units
Ver 2.00
[Setting]
2016/08/25
Page: 37