Print Raster Graphics Esc . C V H M Nl Nh D1 - Epson L1300 Programming Manual

5.1.24 Print raster graphics ESC . c v h m nL nH d1...dk (c=0,1)
ESC . c v h m nL nH d1...dk (c=0,1)
[Name]
[Format]
[Range of Definition]
[Function]
Revision: 2
Print raster graphics
1BH, 2EH, c, v, h m, nL, nH, d1...dk
c=0, 1
v=5, 10, 20, 30 (v/3600 dpi)
h=5, 10 (h/3600 dpi)
0 ≤ nL ≤ 255
0 ≤ nH ≤ 127
0 ≤ d ≤ 255
m=1, 8, 24, (color mode)
This function prints raster graphics at
c style compression, with
y /3600 dpi vertical density, and
h /3600 dpi horizontal density, to print out
m raster lines, or scan lines, or rows of dots in the vertical direction, covering
(nH * 256) + nL total dots, using
k subsequent bytes of data.
1) If c has any value other than those specified above, this command terminates at the instant
that c is processed.
If either v or h has any value other than the above, this command is ignored.
2) The actual image pattern is generated according to a raster method determined by the
following parameters:
c: printing mode
00H: full graphics mode (non-compressed mode)
01H: run-length encoded compression mode
v: printing density in the vertical direction v/3600 (dpi)
h: printing density in the horizontal direction h/3600 (dpi)
m: number of dots (rows) in the vertical direction, number of raster or
scan lines
nL, nH: number of dots covered in the horizontal direction =
((256 x nH) + nL)
k: number of items of data = m x int((nH x 256 + nL + 7)/8) for
uncompressed data
d: data
= undeterminable amount for compressed data
Ver 1.00
[Operation]
2016/08/25
Page: 48