Set Horizontal Print Position (Remote Mode) "Fp" 03H 00H 00H M1 M2 - Epson L1300 Programming Manual

6.1.4 Set horizontal print position
[Format]
[Function]
Horizontal Print Start Position
Standard position
Borderless print position(-3.5mm)
Borderless print position(-2.5mm)
Revision: 2
(Remote Mode) "FP" 03H 00H 00H m1 m2
"FP" 03H 00H 00H m1 m2:
* The parameter "m1" , "m2" are each one byte binary data that indicate the below condition
according to the following formula.
* The unit of print start position is 1/360 inch.
(print start position) = ( ( m2 ∗ 256 ) + m1 )
* If the parameter is out of range, this command is ignored, and the previous setting is
maintained.
m1 m2
00H 00H
A0H FFH
B0H FFH
2016/08/25
Page: 65