Initial Set-Up; Device Management Utility (Dmu) - Ametek Surgex SA-20-AR User Manual

______________________________________________________________________________
IV. INITIAL SET-UP

Device Management Utility (DMU)

The SurgeX Device Management Utility (DMU)
provides the easiest means to find and configure
your AR for use. The DMU can:
1. Automatically discover multiple ARs on a
local network.
2. Display the current IP address of each AR.
3. Allow the setting of a new IP address for each AR.
4. Perform firmware upgrades.
5. Return an AR to Factory Defaults.
The SurgeX Device Management Utility is
available on the SurgeX website at
http://www.surgex.com
Note: The IP address can only be set within the
first 2 minutes after powering up the AR. The
utility will only work with ARs on the same local
subnet as the PC.
• Device
o Discover: Automatically discover all
ARs on the local network. The DMU
will display the location name of the
AR, the product ID and version
number, the current IP address, and the
MAC address. Factory defaulted ARs
will display with the name Axess
Ready and have an IP address that was
automatically assigned by the DHCP
server on your network.
- The IP address field also indicates the port for web access that is currently in
use by the AR. The standard port for web browser accessibility is factory
default Port 80.
o Add: Manually add an AR by IP address.
o Clear: Clear the list.
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com
SA-20-AR User Manual
5