Network - Ametek Surgex SA-20-AR User Manual

______________________________________________________________________________

Network

• IP Mode: Select Static to manually set the IP address using the fields below or
choose DHCP to allow the AR to automatically acquire its network settings from
a DHCP server.
• IP Address: Enter a static IP address in dotted decimal format. This field will be
automatically set if using DHCP.
• Subnet Mask: Enter the Subnet Mask in dotted decimal format. This field will be
automatically set if using DHCP.
• Gateway: Enter the Gateway in dotted decimal format. This field will be
automatically set if using DHCP.
• DNS: Enter the Domain Name Server address. This will be automatically set if
using DHCP.
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com
SA-20-AR User Manual
10