Schedule - Ametek Surgex SA-20-AR User Manual

______________________________________________________________________________
o Schedule
The AR can schedule up to 8 recurring power events. For each event, you may define the
starting date and time, the action to be taken, and the repetition interval (optional).
Important: A Network Time Server (NTS) must be specified and enabled in order to use
the time scheduling feature. A list of public time servers is available at
http://www.ntp.org.
• Date: Set the initial date for the event in mm/dd/yyyy format.
• Time: Set the initial time for the event in hh:mm format. Hours are specified in
24-hour format; for example, 8:05 pm would be entered as 20:05.
• Repeat (Optional): Set the repetition interval. 0-999 Days, Hours, or Minutes.
• Action: Set the action to be scheduled. On, Off, or Cycle.
• Enable: Enables the event when checked. Uncheck to disable the event.
• Clear: Deletes a schedule.
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com
SA-20-AR User Manual
14