Table of Contents
Advertisement
____________________________________________________________________________________________________________
Network Commands
Command
get network
set ipmode < static | dhcp >
set ipaddress < dotted decimal >
set subnet < dotted decimal >
set gateway < dotted decimal >
set http port < 0-65535 >
set telnet port < 0-65535 >
set dxp port < 0-65535 >
set timeout < 0-999 >
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com
SA-20-AR
Description
Returns all network settings currently in use. Example:
Mode:
DHCP
IP Address: 10.1.2.69
Subnet:
255.255.255.0
Gateway:
10.1.2.1
HTTP Port:
80
Telnet Port: 23
DxP Port:
9100
Timeout:
20
Ok
Sets the IP address mode. Static mode locks the IP address
as set; DHCP mode allows a DHCP server to assign the
address.
Sets the IP address.
Sets the Subnet Mask.
Sets the Gateway address.
Sets the port that the internal Web server listens for
incoming connections on. When set to 0 the web server is
disabled. May not be disabled when Telnet and DxP are
both disabled.
Sets the port that the internal Telnet server listens for
incoming connections on. When set to 0 the Telnet server
is disabled. May not be disabled when Web and DxP are
both disabled.
Sets the port that the internal DxP service listens for
incoming connections on. When set to 0 the DxP service
is disabled. May not be disabled when Web and Telnet are
both disabled.
Sets the automatic network timeout in minutes.
User Manual
Admin
Fact Def
Yes
Yes
Static
Yes
192.168.1.254
Yes
255.255.255.0
Yes
192.168.1.1
Yes
80
Yes
23
Yes
9100
Yes
2
17
Advertisement
Table of Contents
