Introduction - Ametek Surgex SA-20-AR User Manual

______________________________________________________________________________
I. INTRODUCTION
®
The SurgeX SA-20-AR is a network attached, IP addressed, web-controlled AC surge
eliminator and power conditioner. The SA-20-AR may be used to switch up to 20A at 120V.
The simple web server structure allows basic control of two outlets. The extensive programming
and setup capabilities are accessed by a web browser, through a Device Management Utility
(DMU), or through a Command Line Interface (CLI).
• The SA-20-AR features SurgeX
Impedance Tolerant EMI/RFI filtering.
• Remote reboot any device: monitors, routers, servers, kiosks, etc. The remote device need
not be network attached.
• Conserve energy by powering down equipment when not in use.
• Telnet access uses the Command Line Interface (CLI) structure and syntax to completely
configure and control the SA-20-AR. This Axess Ready (AR) device also supports the
DxP protocol, which allows software developers to integrate the unit into custom
applications.
• Up to 2 systems can be continuously monitored with AutoPing, with automatic power
control upon loss of contact. Reboot crashed systems, or provide auto power-up or -down
for environmental controls and notification systems.
• The SA-20-AR utilizes 2 levels of password security, with only the administrative
account having access to setup and configuration.
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com
SA-20-AR
®
Advanced Series Mode
User Manual
®
surge elimination and
2