Automated Boot Into The Eyelink 1000 Operating System; Figure 11-9: Select Description And Icons; Figure 11-10: Order Add And Remove - SR Research EyeLink 1000 Installation Manual

Figure 11-9: Select Description and Icons

Figure 11-10: Order Add and Remove

11.8

Automated boot into the EyeLink 1000 Operating System

1. If you would like System Commander to automatically boot into the EyeLink partition,
click on 'Timeouts and default OS' from the 'Settings' window.
2. Check the box beside 'Auto-select timeout' and set the number of seconds for System
Commander to wait before booting the default operating system. Indicate the default OS
in the 'Default OS selection'. If you followed the earlier instruction, EyeLink will be the
first OS and can be selected by choosing 'A'.
3. Once you have completed this step, close the windows by clicking the X in the top right
corner. You will be returned to the main System Commander window and are now
ready to test the installation.
Appendix B: Windows 2000/XP Host PC Software Installation
2005-2010 SR Research Ltd.
85